ec147cd1bab6d6dfacd71f7ee48684033c7501c6
85
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Kristian WindandClaude Opus 5
|
cbe66d75a5 |
feat(capture): skriv hvor som helst, og se hvad feltet forstår
Release / Build and publish image (push) Failing after 10m4s
To ting fra Doda. Begynder man at skrive et sted i appen, åbner hurtig tilføjelse med bogstavet allerede i feltet — ingen knap at ramme først, og tanken skal ikke overleve en rejse hen for at finde et sted at ligge. Og under feltet står nu, hvad parseren kan læse: #projekt, /sektion, @etiket, p1, en dato. Det stod i pladsholderen før, som er det ene sted en hjælp ikke kan stå: den forsvinder ved første anslag, altså præcis når den begynder at være nyttig. Prisen er de enkelte bogstaver som genveje. Ét tastatur kan ikke både stave "tal med Anders" og springe til I dag på samme t, og det, man gør halvtreds gange om dagen, er at fange. Navigation ligger i paletten, som kan mere og koster ét anslag. Genvejssiden er rettet, så den ikke lover q, t og u. Undervejs, i den rækkefølge testene fandt dem: reglen var først "er det et tekstfelt?", hvilket stjal bogstaver fra en fokuseret knap eller liste — den er nu "har noget som helst fokus?". Hjælpelinjen lå i flowet og skubbede hele listen ned, når feltet fik fokus, så klik landede en række forkert; tolv tests fangede det. Den svæver nu, og efter at have svævet ovenpå den første opgave og slugt dens klik tager den ikke længere imod pegeredskaber. Og en fejl, der allerede lå der: q slog feltet op på aria-label="Ny opgave", så genvejen gjorde stille ingenting for enhver, der kørte fladen på engelsk. Feltet findes nu på et mærke, ikke på en oversat tekst. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
c151d6c98c |
feat(groups): omdøb med dobbeltklik, og slet der hvor man kan se hvad man sletter
Release / Build and publish image (push) Failing after 9m59s
De to ord "Omdøb" og "Slet" lå oven på gruppens navn, hver gang musen var i nærheden. De er væk fra sidebjælken. Omdøbning starter nu ved dobbeltklik på rækken — eller F2, hvis man har den i fokus og ikke vil bruge musen. Sletning er flyttet til gruppens egen side, hvor projekterne, den ikke tager med sig, står på skærmen ovenover knappen. Dobbeltklik på et navn, der også er et link, er ikke gratis. Første forsøg lod det første klik navigere, og så åbnede siden mens omdøbningsformularen kom frem — farveprikkerne flyttede sig ud under markøren, hvilket testen fangede som "element is not stable". Navigationen venter derfor to tiendedele på et muligt andet klik. Det er under grænsen for et dobbeltklik og over grænsen for at mærke det. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
bb25b94f96 |
fix(sidebar): en gruppe står nu hvor projekterne står, og hedder hele sit navn
To fejl i samme række. "Omdøb" og "Slet" lå i flowet og optog deres bredde også usynlige, så ARBEJDE blev tegnet som "ARBE"; de ligger nu over rækkens højre ende og dukker op ved hover. Og chevronen sad før navnet og skubbede en gruppe toogtyve pixels længere ind end de projekter, den indeholder — så en gruppe så ud til at ligge under dem. Den deler nu plads med gruppens prik: prikken hviler, chevronen tager over ved hover, og bliver stående mens gruppen er foldet. De sidste otte pixels sad i a-reglen, som giver hvert link i sidebjælken sin egen venstrepolstring oven i rækkens. Prøven, der holdt øje med rækken, målte at alt lå side om side — hvilket var netop den geometri, der skulle laves om. Den måler nu det, der blev bedt om: at navnet kan læses helt, og at gruppens prik står præcis hvor et projekts gør. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
c4e480a0c4 |
fix(gmail): stop hiding why it failed, twice over
Release / Build and publish image (push) Failing after 10m6s
Reported from use: "Fetch now" said "something went wrong" and the error log was empty. Both halves were the same bug wearing two hats. `handleGmailSyncNow` answered 502 with the code `internal_error`, which the interface maps to a generic sentence — so Google's own words, which are the whole diagnosis, were replaced by one that says nothing. And `writeError` records nothing; only `s.internal` does. So there was no message to read and nowhere to look it up afterwards. `s.upstream()` is the answer: 502 because this is somebody else's service saying no rather than this server breaking, a code of its own so the interface can quote what was said, and a row in the error log — which is the entire reason that log exists. A Gmail sync failing quietly for a week is otherwise invisible: the background job writes a line the next restart erases. The same connection also left the mailbox unnamed. The address is learned at connect time and that call can fail; a warning went to the log and an empty string to the database, so the page said "an unknown account" and kept saying it. The only way back was to disconnect and reconnect, which nobody would guess. The status endpoint asks again when it finds none, so a wrong answer lasts until the next look rather than until somebody reconnects. Ten Danish strings were hiding in `confirm()` and `app.toast()` calls, including every destructive confirmation in the app — the worst possible set to leave in one language, since it is what somebody reads in the half-second before agreeing to lose something. The i18n guard reads markup and attributes, and a string argument lives in the script block. It reads those now, and found four my own grep missed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
19aa02e80c |
feat(projects): section headings you can count at a glance, and an Inbox that speaks the language
Two from use. Section headings were small uppercase text over a hairline — a heading you have to look for. A project with four sections is four groups, and the eye should be able to count them without reading a word, so the heading gets a ground of its own and the rows sit against the page. `--surface` rather than a tint of the accent: the colour on that page belongs to the project, and a section is not a second thing to colour. A step in lightness separates them in all five themes without anybody measuring anything. And the Inbox. The server names it at account creation, before anybody has seen a settings page, so it is the one project name nobody chose — and an account made in Danish went on saying "Indbakke" inside an English interface, which reads as a string somebody forgot to translate. It was. `projectName()` translates it while it still carries the name the server gave it; rename it and that is your name for it, in every language, like any other project. The rename field keeps the raw name, or editing a translated label would save the translation. The screenshot set gains the list view, which is where sections read as bands rather than as columns — and the shape most people actually work in. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
fe52818ab6 |
feat(auth): passkeys, as a way in and as a second factor
A password and a TOTP code are both shared secrets: the server keeps something that can be stolen from it, and the person keeps something that can be talked out of them. A passkey is neither. The private half never leaves the device, and the signature is bound to the origin that asked for it — so a convincing copy of the sign-in page at another address gets a signature it cannot use. Logging in asks for no email. The device knows which account its key belongs to, which is not only convenience: it means the sign-in page cannot be used to find out who has an account here. A key that verified its owner is both factors at once and completes the login; one that only proved possession still meets the TOTP step, exactly as a password does. The relying party id is derived from VERDANDE_BASE_URL rather than configured separately — a second setting that has to agree with the first is one that will one day disagree, and the failure is a login nobody can complete. An IP address is refused up front: no browser accepts one, and without the check the server issues a challenge happily and the browser throws SecurityError long afterwards. The list endpoint reports whether this deployment can offer them at all, so the interface never shows a button that cannot work. A challenge is stored server-side, answerable exactly once, and taken rather than read — two requests racing the same one would both succeed, which is the shape of a replay. A sign count that has gone backwards means the credential was cloned and is refused rather than logged. The Go tests cover who may reach these endpoints and that challenges are spent. The ceremony itself needs an authenticator, so the smoke test drives Chromium's virtual one over CDP — the only thing that can tell whether the base64url conversions are right, since one wrong byte produces a signature that will not verify and reads as a broken key rather than a broken encoder. That test runs at localhost in its own context while the suite stays on the loopback address, because WebAuthn refuses an IP and resolving localhost is slow enough here to cost the suite minutes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
a52ad9817f |
feat(tasks): undo a completion, and a place to find what was closed
Reported from use: "I just closed a task by accident, and there is no undo and no list of closed tasks." Both halves were true. Completing is one click on a small circle beside a row you were only reading, and it takes the row off the screen — so the mistake and the evidence of it leave together. There was no name left to search for and nowhere to look: the project page can show its own closed tasks, but only if you already know which project it was in. The toast covers the mistake you notice at once. It names the task, so you can see which one you hit, and stands for twelve seconds rather than five — five is enough to read "could not save" and not enough to notice, decide and reach the mouse. A toast with an action also gets two targets: the message dismisses and the action acts, which were one button before and would otherwise put "yes, put it back" and "go away" in the same place. `/faerdige` covers the one you notice tomorrow. A place rather than a toggle in every view, because somebody hunting for a task they closed does not know which view they closed it in. Newest first — a record of what is finished is read backwards from now, not by a due date the task no longer has — and grouped by the day, because "I dag" and "I går" is how anybody would describe it. A recurring task is offered no undo. Completing it moves it to its next date rather than closing it, so there is nothing to reverse, and an undo that quietly rolled the date back would be a different act from the one it claims to be. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
0dbf7a40bf |
feat(tasks): write a task straight into a section
The box at the top puts things in the project with no section, which is right for capturing. But a project has sections because the work belongs somewhere, and dragging every new task down into the right one is a second gesture for something you already knew when you typed it. Two ways in, because they answer different moments. A field at the foot of each section and each board column — standing there is enough, no syntax to know. And `/section` in quick add, for the box at the top and for Today and Upcoming, where you are not standing in a section at all. The field goes through quick add rather than createTask, so a line written there still parses its dates, priorities and labels. The sigil needed care: '#' and '@' never turn up in a Danish task line by accident and '/' turns up constantly. It has to follow whitespace and be followed immediately by the name, which "km/t", "3/4" and "20 kr / stk" all fail. The bare form is greedy, because "Kunder/Ordrer" is a real section name and the sigil is inside it. A section id from the client is checked against the project the task actually landed in. A `#project` in the same line can move the task elsewhere, and the id would otherwise follow it into a project that section does not belong to. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
d6d5bf590b |
fix(sections): a section can hold more than one task
Reported as "sections can only have one task", and that is exactly what it looked like. TaskList read the dragged task from its own `draggingId`, which is only set when the drag *started* in that list. A task dragged in from the unsectioned rows above, or from another section, arrived as null and the handler returned early — after it had already called `stopPropagation`, so the section around it never got the drop either. So a section could only be dropped into while it was empty, because an empty one has no row in the way to swallow the drop. Put one task in and there was no route to a second. The id comes out of `dataTransfer` at drop time now, and `dragover` decides with `carries()` rather than local state — which is the only thing a target can read while a drag is in the air. The stuck frame was the same cause: the section's own cleanup never ran, so the highlight stayed lit after the drop. It is cleared on `dragend` now, which fires once per drag on the source and bubbles to the window — the one place that is true however a drag ends, including one abandoned with Escape, which produces no drop at all and left the frame standing too. The smoke test drops a second task onto the row already in the section, which is the gesture that did nothing, and runs in WebKit as well. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
4d8b70918b |
feat(i18n): the interface speaks both languages
The account has had a `locale` since the beginning and it only chose which grammar quick add read a line with — so picking English changed nothing anybody could see, and the field said so honestly: "Sprog i hurtig tilføjelse". It says "Sprog" now, because it means it. Every component goes through `t()`. Danish is the source: a key missing from English falls through to Danish rather than to the key, because a Danish sentence in an English screen can be read and `settings.notifications.title` cannot. `tag()` is the single place `Intl` is asked. Before, `'da-DK'` was written into a dozen components, and that is the half of a translation that gets left behind — an English interface still saying "24. aug." is exactly the shape of a job half done. There is a smoke test that switches to English and refuses to see a Danish month name in the calendar's heading. Colour and theme names are keys now. `colors.js` keeps its ids untouched — they are what the database stores, and `internal/store` reads them out of that file — but `name` is `'color.tomato'`, resolved where it is drawn. The Inbox keeps its name. It is a project row the server creates at signup, not a string in the interface, and it can be renamed like any other project. Four copies of "3 hours ago" became one, in `web/src/lib/when.js`. They had already drifted: one said "aldrig logget ind", another "aldrig", and two stopped at days where the others carried on to a date. Routes stay Danish. `/indstillinger`, `/projekt`, `/uddelegeret` are bookmarks and they are in every smoke test; translating them buys nothing and costs both. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
e3c7fc792a |
feat(i18n): the machinery, and the shell translated
The account has had a `locale` since the beginning, and it only chose which
grammar quick add parsed a line with — so setting it to English changed nothing
anybody could see. This is the other half of that field, started.
`t()` reads `i18n.locale`, which is `$state`, so every component that calls it
redraws when the language changes; that is what makes the setting take effect
without a reload, and why the module is `.svelte.js`. Danish is the source and the
fallback: a key missing from English falls through to Danish rather than to the
key, because a Danish sentence in an English screen can be read and
`settings.notifications.title` cannot. `tag()` is the single place `Intl` is
asked, so dates follow the language instead of being `da-DK` in a dozen files.
`internal/i18n` is a Go package that exists only to fail the build when the two
dictionaries drift — the same trick `colors_test.go` plays on the palette. It
checks the placeholders as well as the keys: a translation that spells `{n}` as
`{antal}` leaves `{antal}` on the screen, which is worse than an untranslated
sentence because it looks like a bug in the app rather than a gap in a dictionary.
Converted so far: the shell. Sidebar, layout, quick add, task row, command
palette — fifty-two keys, and the surfaces people look at constantly. Twenty
files remain, the settings pages being the heavy ones.
The language picker is deliberately not wired up yet. It still says "Sprog i
hurtig tilføjelse" and still only changes the parser. Wiring it before the sweep
is done would hand anybody who picks English a bilingual screen — the
half-finished-theme failure `app.css` already taught us. As it stands Danish is
unchanged and English is not offered, which is the honest state for something
half done.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Kristian WindandClaude Opus 5
|
804963b222 |
feat(groups): a group becomes somewhere you can go
It was a heading over some rows: a name, a colour, and whether it was folded.
Enough to tidy a list, and not enough to be what people mean by it — "Arbejde" is
a body of work with context of its own, and documents that belong to all of it
rather than to any one project inside it.
`/gruppe/{id}` carries three things a heading cannot. The projects in it, each
with what is still open — open tasks, not all of them, because "12" beside a
project somebody finished last year is a number that means nothing. A description,
written in place and saved on blur, the same shape a task's description has. And
the files that govern the whole group: the contract, the drawing, the agreement
everything else rests on.
The name in the sidebar is a link to it and the chevron beside it still folds.
Two intentions, two targets — the single one they used to share could only ever
serve the smaller.
Migration 0012 rebuilds `attachments`, because its CHECK spelled out exactly which
parent columns may be set and SQLite cannot alter a CHECK. The rule is still
"exactly one parent", counted rather than written out as pairwise comparisons:
with three columns that is three clauses, with four it is six, and the version
that is wrong looks exactly like the one that is right.
A group's file is reachable by its owner and nobody else. A group belongs to one
person and is never shared, so `reachAttachment` asks about ownership rather than
a project role — both old callers resolved straight to a task, so a group's
attachment answered 404 for the person who uploaded it.
Three tests also stopped racing their own navigation. Creating a project navigates
and `goto` is a promise nobody was holding, so a quick add fired straight after
could land in the Inbox instead — intermittent, and it read as the quick add
having failed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Kristian WindandClaude Opus 5
|
eaff890860 |
fix(forms): Safari focused none of them, and a board could not make a section
Two reports, one sentence between them: "sections have no function, because you cannot create more than one." `autofocus` does not work in Safari for anything inserted after the page has loaded, and every inline form here is inserted after the page has loaded — rename a project, add a section, name a group. In Safari they all opened with no cursor in them and what you typed went nowhere. That does not look like a bug. It looks like the feature does not work. `use:focusOnMount` replaces all seventeen. And the board had no way to add a section at all. The button lived only in the list view, which is the one place nobody looks for it: a column on a board *is* a section, so that is where you go to make one. Chasing this turned up a third. The task drawer's three fields save on blur, and closing the drawer *is* a blur — the input is being unmounted and the browser fires blur on the way out. If the task left the store in the same moment, `task` was already null and the handler threw `Cannot read properties of null`, stopping the page. It only became reproducible once focus actually worked. Fields are 16px on a touch device now, whatever the component asked for. Below 16px, iOS Safari zooms in when a field takes focus and does not zoom back out — so the whole interface is left too large and has to be pinched back by hand, once per field. The type scale tops out at 15px, so every input in the app did it. The sidebar's resize handle sat at `right: -3px`. An absolutely positioned child counts towards its container's scrollable overflow, and `overflow-y: auto` resolves the other axis to `auto` too — so those three pixels gave the whole menu a horizontal scrollbar on every desktop, always. The account name could do it as well: `overflow: hidden` with no `min-width: 0` cannot shrink, so the row grew instead of ellipsing. There is a WebKit pass in the suite now, over one test. The rest stays Chromium on purpose — a smoke test exists to catch a build that does not work, and three engines find the same bug three times — but focus is the exception, and it took a person using the app to find that out. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
04a7ba1024 |
feat(sidebar): headings that fold, a group head that is not indented, and colour where it is edited
Three things reported from use, all in the sidebar. Projekter, Delt med mig, Filtre and Etiketter fold, the way a project group already does. Kept on the account rather than in localStorage, and for the same reason the group's own `collapsed` is: folding a heading says "this is the part of my work I am not in right now", and that is as true on the laptop as on the desktop. The sidebar's *width* is the opposite case and stays per browser. A JSON array of keys rather than a column each, so a renamed heading is not a migration. The group heading is no longer indented — only what is filed under it. The colour dot sat as a sibling before the fold button and pushed the whole row in, and a heading that starts further in than the rows above it says the heading is inside something. And the colour is chosen while renaming. The dot was itself the button, which gave the heading four controls on a line narrow enough to crowd the name; both are edits to the same thing, so they belong in the same moment. The form closes on `focusout` and only when focus has left it entirely, and the swatches refuse focus on mousedown — Safari and Firefox do not focus a button on click, so `relatedTarget` would be null and the form would shut under the pointer. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
b169591209 |
feat(upcoming): a week at a time, so a drag can cross a month boundary
A month grid is anchored to a month, so the two days on either side of its edge sit in different grids — and you cannot page mid-drag, because a drag in flight swallows the click that would page. A week that straddles the 31st and the 1st has both days in the same row. The same component as the month, with `span="week"`, rather than a second one: the part that is easy to get almost right is the same in both. A drop target has to decide from `dataTransfer.types` alone whether it accepts, and two copies of that are two places to be almost right. Seven cells instead of forty-two, so the height a month spends on six rows goes into one and the cells hold a real list rather than a hint. On a phone the row stacks and each day carries its own weekday name, because a column of bare numbers is not a week. `calendar` still means the month in localStorage. It is the value already stored for everybody who chose it, and renaming it would silently reset them. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
494640c1a8 |
fix(mobile): the drawer no longer pushes the page sideways
Release / Build and publish image (push) Failing after 10m8s
The task drawer was `width: 100vw`. A viewport unit includes the scrollbar gutter and a percentage does not, so the drawer came out a few pixels wider than the page it was pinned to and the whole document could be shoved sideways. It is `100%` now, and at phone width it is stated as four insets instead — a box defined by the viewport's own edges cannot be a rounding error wider than it. The scrolling body gets `min-width: 0` and `overflow-x: hidden` too, so a pasted URL or a long unbroken word in a comment cannot stretch the flex column and take the page with it. Writing the test for that found another one: creating a project from the sidebar navigated to it and left the drawer covering the screen. Every link in there closes it on the way out; the form did not, because it calls `goto` directly. Now it does the same thing for the same reason. The phone test checks the document cannot be scrolled horizontally, both with the drawer shut and with it open. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
7094e05ddd |
feat(sidebar): drop a task on "I dag"
"Do it today" is the most-made rescheduling there is, and the sidebar is where the pointer already is when you have picked a task up. Only that one of the two date views. "Kommende" is a range rather than a day — it starts today and runs a week — so a drop on it would have to invent a date its own label does not name. The month grid inside it takes a drop per cell, which is where a specific day is actually on offer. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
35d9e3bdac |
feat: an assignee on the row, and the activity log made visible
Release / Build and publish image (push) Failing after 10m2s
Two more things the database has been recording and the interface has
never shown.
**Who a task is waiting on, on the row.** Only when it is not you: your own
list would otherwise carry your own face on every line, which is a column
of one initial telling you nothing. The point of showing an assignee is
that it is somebody else.
That needed names, and a task carries only an `assignee_id`. `GET /people`
is the primitive: everybody you share a project with, plus yourself,
fetched once per session. Not per row, and not per project either — a list
would have to know which project each task belongs to before it could ask
for that project's members. Deliberately *not* the instance's user list,
which is `/users` and administrators only: a task list has no business
enumerating everybody with an account here.
It sits first in the meta line, because who changes what the rest of the
line means — a date on somebody else's task is their deadline, not yours.
**And the activity log.** Nineteen kinds of entry have been written since
the beginning — every project, section, member, task and comment event —
and `GET /projects/{id}/activity` has answered honestly the whole time with
nothing on the other end. There is a Historik panel on the project now,
loaded when it is opened rather than with the page, and the event keys
become Danish in exactly one place. An unknown key falls through to itself
rather than being hidden: a build that records something this table has not
learned should still show that it happened.
One test assertion had to change, and it is worth saying why. It matched
"males inden fredag" against a row whose title is "males inden" — quick add
read "fredag" as the due date — so it was really matching the title
concatenated with the metadata beside it. Putting the assignee between them
broke it. The assertion now names the task's own text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Kristian WindandClaude Opus 5
|
fc32fea607 |
fix(projects): a section can be dropped into, and a failed load says so
Release / Build and publish image (push) Failing after 9m53s
Two things from the same report — an external member who could see a project but could not get work into it. **A section with no tasks could not be filled by dragging.** Only the task rows accepted a drop, so the target was always another row; a section with none had nothing to aim at, and a section you have just made is empty by definition, which is exactly when you want to put something in it. The board has taken a drop on the column since it was written. The list now does the same: the section is the target, and a drop on it puts the task at the end. Dropping on a row still means "here exactly" and stops there rather than bubbling to the section behind it. The unsectioned block at the top is a target too, which is how a task comes back *out* of a section — previously only possible if some other loose task happened to be there to aim at. **And the page said "Projektet findes ikke, eller du har ikke adgang til det" for three different things.** `project` started null with no loading state, so that sentence was what you saw before the first request returned, what you saw when it failed, and what you saw when you genuinely had no access — and the effect never asked again, so the wrong one stayed until somebody reloaded. That is very likely what was reported: the container was restarted twice while people had the app open, and a request that lands mid-restart leaves the page insisting the project does not exist. Four states now. Loading renders nothing, as the shell does. 404 keeps the old sentence, since the server deliberately answers 404 for both "no such project" and "not yours" and the interface must not guess between them. Anything else says the request failed and offers to try again. What is *not* a bug: a viewer cannot create or move tasks. Checked at the API — an editor invited by link gets 201 on create, 201 on quick add and 200 on a move into a section; a viewer gets 404 on all of them, which is the rule working. If the person reporting this cannot add tasks, their membership is viewer rather than editor. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
550f420c59 |
feat(sidebar): colours you can choose, and projects indented under their group
`projects.color` has been in the schema since the first migration, has defaulted to 'graphite' on every row ever written, and nothing has ever read it. There was no palette, no name-to-colour mapping, and the dot in the sidebar was hardcoded to a border grey. So this is not "add a picker"; it is implementing colour for the first time. Names, not hex values. A hex in ten thousand rows is a decision nobody can revisit; a name is resolved when the interface paints and can be retuned for a new theme or a new display. It is also the difference between a database that stores a fact and one that stores a rendering. The set is closed and refused at the edge — an unknown name would be stored happily and painted as the default, which looks like a colour that did not save. One palette across all five themes, and this is the one place in app.css that is not redefined per theme. Everything else there is text, a ground or a border and has to be measured against what sits behind it. These are small solid marks beside a label that already carries the meaning: what they owe is to be told apart, and to be visible on both a near-black and a white ground, which is why all ten sit in the mid-tone band. It also keeps them out of the trap the themes are in — a colour added to four blocks and forgotten in the fifth looks finished and falls back silently. There is no fifth block to forget. The list is written down three times: Go for validation, colors.js for the picker, app.css for the tokens that paint. So a test reads the other two — the same small-scanner approach openapi_test.go takes to the spec — and fails if the server accepts a colour nothing can draw, or the picker offers one the server refuses. Groups get a colour of their own (migration 0006) and projects inside a group are indented. The indent is to the group's *name*, not to its dot: the eye follows the text, and lining the projects up under the dot leaves them looking a step short of where the heading starts. The drop line is indented with them, so a drop inside a group reads as landing in the group. The group's dot is the control as well as the preview — you press the thing you are about to change, as on the project page. That was not the first design: a third text action, "Farve", sat beside Omdøb and Slet, and those carry `opacity: 0` rather than `display: none`, so they take their width whether or not you can see them. A group called "Arbejde" rendered as "ARBEJD". Moving the control onto the dot gave the name its room back. The smoke test measures the indent at the content edge rather than the element's, because the indent is padding and the box does not move — which is how the first version of that assertion passed 12 against 12. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
a8b453843d |
fix(sidebar): Omdøb og Slet lå oven i hinanden i et gruppehoved
Release / Build and publish image (push) Failing after 9m53s
The "+" beside "Projekter" is a 20px square icon button, and the rule that makes it one was written as `.group-head > button`. A group's heading is also a `.group-head`, and it has two buttons in it that are words rather than icons — so Omdøb and Slet were each squeezed into a 20px box, where they overflowed and were drawn on top of each other. They still worked. Every assertion in the smoke test clicks by accessible name, which is unaffected by a button being the wrong size, so the whole suite passed on a heading that read "0 Om…Slet". It took a screenshot from somebody actually using it. The selector now asks for the class instead of for "a button in a heading", so the next text button added there is safe by default rather than by remembering. And the smoke test measures the row: each button must start at or after the previous one's right edge. A layout assertion is unusual here on purpose — the rest of the file deliberately tests behaviour — but this is a failure mode behaviour cannot see. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
6b6b838167 |
feat(views): "Venter på andre", and a project you share stays yours
`assignee_id` has been on tasks since sharing was built and delegating has been possible from the drawer since yesterday. What was missing was anywhere to see it: work handed to somebody else left your lists and appeared in nothing. GET /delegated returns everything assigned to somebody who is not you, in the projects you can see, grouped by the person. Grouped on the server rather than flat, because the question is about people — "what is Anders sitting on" — and a client cannot group it itself: it would need the name behind an assignee id from a project it does not happen to have open, and there is no way to ask for that. The names come back with the tasks, so one request is one screen. The filter is a field of its own rather than a sentinel in AssigneeID. "What is on my plate" and "what have I handed over" are different questions, and one string that means an id most of the time and a magic word the rest is a field somebody eventually passes a real id to. An assignee whose account is gone is named "Ukendt" rather than dropped. Losing the row would make work disappear from the one view that exists to stop work disappearing. The sidebar entry only appears where delegating is possible at all. On an instance with one person it could never have anything in it, and a permanent empty entry is a question the sidebar keeps asking and answering "no". Building it turned up a bug in the split above it. "Projekter" and "Delt med mig" were divided on `shared`, which only means the project has more than one member — so inviting somebody to a project of your own moved it under "Delt med mig", where it lost its place in the order, stopped being draggable, and could not be filed under a group. It is divided on ownership now, which is what the two headings have always said. Sharing your own project is not the same event as somebody sharing theirs with you. The smoke test now follows the whole loop in one go: invite, accept in a second browser, assign a task to the person who just joined, and find it under their name — with the shared project still under "Projekter" on the way past. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
34b718529c |
fix(auth): the two links sent by email now go somewhere
An invite has always emailed `/invite?token=…` and "Glemt adgangskode?" has always emailed `/reset?token=…`. Neither address existed. The Go binary serves the app shell for anything it does not recognise, the shell found no session, and both links opened the plain sign-in form — asking an invited person to log into an account that did not exist yet, and asking somebody who had forgotten their password for their password. Both APIs were finished. `POST /auth/signup` takes the invite token, reads the email address off the invite rather than the form — so a link cannot be redirected to somebody else — creates the account, accepts the invite and starts the session, all in one transaction. `POST /auth/password/reset` takes the reset token and ends every session the account had. Nothing was missing but two pages. They are branches of SignIn rather than screens of their own, which is what that component already says it is for: one decision tree, so a person is never redirected mid-authentication. The routes exist because a link has to be an address, and each renders the same component; it reads the token out of the URL itself. The reset does not sign you in afterwards. The whole point of ending every session is that somebody may have been in the account, and quietly opening a new one here would undo the half of that which matters. Two states that are easy to leave out, and both are reachable in one click from an old email: a link with no token says so instead of showing a form that cannot succeed, and a link opened while already signed in as somebody else offers to log out rather than creating a second account for a person who is right there in the first one. The smoke test walks the whole invite: share a project, read the link out of the panel that shows it when there is no mail server, open it in a second browser context, create the account, and find the shared project in the sidebar. A second context and not a second page — inheriting the session would test the one case that never happens, which is what it did on the first run. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
c14559ed0c |
feat: project groups, a month on Kommende, and dragging things where they go
The three the handoff named as next. They are one commit because they are one mechanism: all three end in something being dragged, and a drop target cannot tell what is coming without the module they now share. Groups are foldable headings over the projects in the sidebar. A table rather than a `group_name` column on the project, because a group has to be renamable in one write, has to survive being emptied, and has to remember whether it is folded — none of which a string repeated on every project row can do. Folded state lives on the row, not in localStorage. The sidebar's *width* is a property of the screen you are sitting at, which is why that one is per browser; a folded group is a statement about the group — "this is the part of my work I am not in right now" — and it is true on the laptop and on the desktop. There is nobody else's answer to disagree with either: a group belongs to exactly one person. A shared project cannot be filed. `group_id` is a column on the project row, so a member grouping somebody else's project would move it in the owner's sidebar too — the same reason `sort_order` is owner-scoped. The listing reports the column only to the owner, so a viewer is never told where somebody else keeps it. Deleting a group takes the heading and leaves the projects, and the sidebar decides where a project renders by whether its group still exists rather than by the id alone. A group deleted in another tab arrives as one event and not one per project, so for a moment the projects still name a heading that is no longer drawn — filing by the raw id would drop them out of the sidebar entirely. Kommende gains the month grid the project pages already had, behind a Liste/Kalender toggle. The two views ask for different things — seven days from today against six whole weeks around an arbitrary month — so each loads its own, and the grid reports which dates it is showing rather than having the page guess. Which view is remembered in localStorage: a month of seven columns needs room, and the answer on a phone is not the answer on a wide monitor. And a task can now be dropped on a project in the sidebar, on a day in Kommende, or on a cell in any month grid. Onto a project it is a *move*, not a field: `sort_order` belongs to the project, so it has to find a place among that project's tasks and leave its old section behind. Each drag now carries its own MIME type. `getData` is deliberately unreadable while a drag is in the air — the browser hands the payload over on drop and not before, so a page cannot read what is being dragged across it — and `dataTransfer.types` is all a target has to decide with. Deciding is the point: calling preventDefault on a drag you cannot accept is what turns "no" into a silent, wrong drop. The sidebar takes a project and a task on the same row and has to tell them apart. Two things fell out of building it. The month grid has always had one cell narrower than the other six: `.today` styled the "I dag" button in the header, and the day cell for today wears the same class, so `margin-left: auto` was shrinking a grid item to its content. It is scoped to the header now. And a project page listed whatever was in the store rather than what belonged to that project, which did not matter until a task could leave a project while you were looking at it. Covered by eight new API tests and two new smoke tests, and the smoke tests drive the drags for real — the type check they exercise exists only while a drag is in flight, so nothing else can reach it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
f15c440942 |
feat(realtime): keep projects and labels current too, not only tasks
The socket carried task events and nothing else, so a project or a label
created anywhere — another tab, another device, Claude through the
connector — did not appear until a reload. Tasks updated live and the
sidebar did not, which reads as the sidebar being broken rather than as a
gap in what is published.
Projects and labels go to the *user* rather than to a project. A project
that has just been created has no subscribers, because nobody was
watching a thing that did not exist a moment ago.
Labels are announced as "something changed" and re-read, rather than sent
as a payload. The sidebar wants each label's task count, which no single
event carries and which moves whenever a task gains or loses a label —
including through quick add, where "@regnskab" invents the label inside a
task write and no label event is sent at all. Comparing the label lists
on a task change is what catches that, without re-reading on every ticked
checkbox.
And projects now go through an upsert, because the same row arrives twice
— once as the response to the request that created it, once over the
socket. Appending both puts two ids into a keyed {#each}, which throws
and stops the sidebar rendering. The tasks already had that guard; adding
the project event without it reintroduced the identical bug, and the
smoke test caught it on the first run.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Kristian WindandClaude Opus 5
|
3b521b463c |
feat(projects): add, rename and delete sections
The board has drawn a column per section since it was written and there was no way to make one. Sections could only be created by the Todoist importer or a template — so an ordinary project could never have a heading in it at all. Add, rename and delete, in the list view where the headings already are. The controls appear on hover rather than sitting beside the heading permanently: a heading with two buttons always next to it stops reading as a heading. Deleting says how many tasks are in the section and that they will survive it, because the API keeps them and drops their section — which is the right behaviour and not what "delete section" sounds like. The list is re-read afterwards, since those tasks move to the unsectioned group and nothing else would tell the view they had. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
9056c44c9a |
feat(tasks): move, repeat, delegate and re-read a task from its drawer
Four things you could not do to a task you had open, and one that had never worked at all. **Project, recurrence and assignee** are now fields in the drawer. A task created in the wrong place could only be fixed by dragging it, a repeat could only be set by typing it into the title when the task was created, and delegation had no interface whatsoever despite assignee_id being in the API from the start. The assignee only appears on a project with somebody else in it, because on your own there is nobody to choose. **The title is read the way quick add reads it.** Typing "i morgen kl 14 p1" into a title used to leave it as those words, so where you typed a sentence decided what it meant. The parse runs on the server — the grammar is Danish and English and lives there — and applies only when it consumed something. What it took is said out loud, and the fields on screen are updated to match: the drawer otherwise seeds its inputs once per task so a save cannot overwrite what you are typing, and that rule has to bend exactly here, where the save changed the very fields in front of you. **And the member list has never worked.** The share panel, and now the assignee field, ask for it. Every call errored: the ORDER BY named an expression, and SQLite only accepts result-set columns across a UNION, so it failed at query time with "1st ORDER BY term does not match any column in the result set". Found by the smoke test that opens a task, which is the second real bug that suite has caught by watching for failed requests rather than only for what renders. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
8c748c2a88 |
feat(sidebar): drag it wider, fold it away, and have it stay that way
The sidebar was 268px and always there. On a wide monitor that wastes the room; on a laptop it takes room the list needs. The width drags from a handle on the border — 7px of target over a 1px line, because a 1px target is a target you miss — and the whole column folds away from a button in the topbar. Both are remembered. In localStorage rather than on the account: this is a property of the screen you are sitting at, not of you. The same person on a laptop and a wide monitor wants different answers, and syncing it would make one of them wrong every time they switch. The handle is also a slider for the keyboard. Arrow keys move it, Home puts it back, and so does a double-click — a drag handle with no keyboard equivalent is a setting some people simply cannot reach. Folding is desktop-only, and the media query says so rather than leaving it to chance: below the breakpoint the sidebar is a drawer that opens over the page, and a collapsed drawer would open to nothing. Clamped to 200–480px in the store, so a stored value from an older build cannot make it unusable either. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
c4e9e1519b |
feat(projects): drag the sidebar into the order you want
Projects have carried sort_order since the first migration and nothing ever set it, so the sidebar was ordered by creation date for good. POST /projects/reorder takes the whole list rather than one move. A person has a handful of projects, so sending the order you want is simpler to reason about than midpoints between neighbours — and it cannot run out of precision, which is the failure the task ordering has to respace a section to recover from. It also cannot land half-applied the way a sequence of individual moves can. Projects you do not own are skipped rather than refused. sort_order is a column on the project, not a preference per viewer, so a shared project sits where its owner put it and a member rearranging their own sidebar does not rearrange somebody else's. The sidebar only makes your own projects draggable, so that rule never shows up as a row that springs back. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
c2a664d891 |
feat(web): drag to reorder in the list view
The board has had it since it was written; the list has not, and
POST /tasks/{id}/move was already tested and working.
Where the board shows the target column, a list has to show the target
gap — the whole decision is "above this one or below it" — so a line is
drawn where the row would land, chosen by which half of the row the
pointer is in rather than by counting rows, which is what keeps it where
the eye expects it when rows have different heights.
The move sends both neighbours. The API's after_id is the task above,
which reads as the opposite of "after" in a vertical list, so the locals
here are named for where they end up on screen.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Kristian WindandClaude Opus 5
|
d288606827 |
feat(web): open a task
TaskRow has had an onedit prop that nothing passed. There was no way to see a task's description, sub-tasks, comments, files or reminders, all of which the API has supported from the start. A drawer rather than a page, so the list you came from stays behind it and ticking a sub-task off and closing lands you where you were rather than at the top of a re-fetched list. Mounted in the root layout and driven by an id in the store, so a task opens the same way from Today, a project, a label or a saved filter — and so an edit arriving over the socket reaches the drawer without a second source of truth to keep in step. Text fields save on blur. A PATCH per keystroke is forty requests for one sentence, and the last to arrive is not necessarily the last one sent. The navigation shortcuts are suppressed while it is open: with a task in front of you, "t" means the letter t. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
9d9444d0ac |
feat(web): the settings surface
There was no /indstillinger route at all. The Gmail OAuth callback redirects there and had been answering 404 since it was written. Six pages rather than one long scroll, because the sections have nothing to do with each other and somebody opening API tokens should not have to walk past their own password to get there: the account and its second factor, notifications, integrations, AI, tokens, and data. Everything listed as having no interface in the handoff is reachable from one of them — the calendar feed, the mail-to-task address, Gmail, the AI provider, import, export, templates and the update notice. Two decisions worth naming. The AI key field starts empty and says why: a settings page that repopulates a password field is one that will eventually leak a key into a screenshot, and an empty value means "leave the stored one alone" rather than "clear it". And the form chrome lives in the layout as :global rules, because scoped styles do not reach a child route and six copies of the same twelve selectors is six places for them to drift. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
fc4dba8549 |
fix(web): every change to the task list builds a new array
Ticking a task off never removed its row. The optimistic update ran, the
request went out, the server answered 200 — and the view did not move.
The same applied to a change arriving over the websocket, which is how
somebody else's edit was supposed to show up. It had never worked.
The common factor was tasks[i] = value. push and whole-array assignment
both reached the views; index assignment did not. Rather than depend on
which mutations the reactivity happens to see through, every write now
goes through app.replace() or app.upsert(), which build a new array. The
lists are at most a few hundred rows and the copy is not worth a moment's
thought next to the class of bug it removes.
upsert exists because the same task arrives twice: once as the response
to the request that created it, and once over the socket, which publishes
to the whole project including whoever did it. Either can land first, and
appending both puts two rows with one id into a keyed {#each} — not a
duplicated row but a thrown error that stops the view rendering.
complete, reopen and update were three copies of the same twenty lines;
they are now one private helper.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Kristian WindandClaude Opus 5
|
0ee72d399c |
feat(web): board and calendar views, saved filters and label pages
The board is one column per section with native drag-and-drop, which works with a trackpad, a mouse and a screen reader without any of them being reimplemented. Dropping is optimistic: a card that snaps back for 200ms reads as a failed drop. Weeks in the calendar start on Monday. That is ISO 8601 and what every Danish calendar does; a Sunday-first grid makes a Dane misread the month at a glance. On a phone the chips give way to coloured bars — at that width the month's shape is the useful part, not the titles. Label pages run the filter language rather than a bespoke endpoint, so a label page and a saved filter can never disagree about what a label selects. fix(recurrence): "hver mandag", not "hver uge mandag" A weekly rule that names its days does not also need the word for the interval. That is how the phrase is said, and it is what the parser accepts back — the round trip through Describe now holds for weekday rules too. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
12a9597919 |
feat(web): SvelteKit PWA with the Nordic design system
The interface for phase 1: sign-in and first-run setup, Today, Upcoming, project views, sharing, Cmd+K search and the keyboard shortcuts. Quick add highlights what the parser understood underneath the text as you type — a mirrored layer behind a transparent input, sliced by byte offset because the server counts bytes and JavaScript counts UTF-16 units, which disagree on exactly the Danish letters this app is full of. Every local action is optimistic and reconciled afterwards: ticking a task off strikes it through and animates it out before the request leaves, and rolls back with a message if the server disagrees. The Content-Security-Policy is computed at startup by hashing the inline scripts in the built index.html. Both of them change on every frontend build, so a hard-coded hash would go stale silently and show up only as a blank page in production. The alternative, 'unsafe-inline', would drop the one protection that makes an injected script in a task title inert. Today is derived from the store by date rather than from the ids that came back with the first request — filtering against a captured list meant a task added through quick add never appeared until a reload. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |