85f7b2488de544c7ffc489bf6c78569ac91cdcea
21
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Kristian WindandClaude Opus 5
|
494640c1a8 |
fix(mobile): the drawer no longer pushes the page sideways
Release / Build and publish image (push) Failing after 10m8s
The task drawer was `width: 100vw`. A viewport unit includes the scrollbar gutter and a percentage does not, so the drawer came out a few pixels wider than the page it was pinned to and the whole document could be shoved sideways. It is `100%` now, and at phone width it is stated as four insets instead — a box defined by the viewport's own edges cannot be a rounding error wider than it. The scrolling body gets `min-width: 0` and `overflow-x: hidden` too, so a pasted URL or a long unbroken word in a comment cannot stretch the flex column and take the page with it. Writing the test for that found another one: creating a project from the sidebar navigated to it and left the drawer covering the screen. Every link in there closes it on the way out; the form did not, because it calls `goto` directly. Now it does the same thing for the same reason. The phone test checks the document cannot be scrolled horizontally, both with the drawer shut and with it open. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
6d27d730d2 |
fix(mobile): the project header wraps instead of crushing the title
Release / Build and publish image (push) Failing after 10m4s
On a phone, a project called "Skovvænget" rendered as a vertical column of single letters while the buttons ran off the right edge. It looked like a broken font. The header is a flex row of a title and four controls, and 390px does not have room for them. Nothing wrapped, so the heading was shrunk to its min-content — which with `overflow-wrap: anywhere` is one character. Adding Historik this evening is what tipped it over. It wraps now, and the title keeps a floor of 8ch so flex stops squeezing at the point where wrapping is the better answer. Kommende had the same shape and gets the same fix. Every other smoke test runs at desktop width, which is exactly why this shipped. There is one at 390 now: it measures the heading's box — wide enough to hold a word, short enough not to be a column of letters — and checks the page cannot be scrolled sideways. Also stops an empty project saying both "Uden sektion" and "Ingenting her endnu": that label is a heading for the tasks outside a section, and with no sections there is nothing for them to be outside of. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
c2e2d66e76 |
feat(admin): keep server errors where a restart cannot take them
Release / Build and publish image (push) Failing after 12m56s
The panel's watcher reported four 5xx today — twice from one address at 11:49, twice from another at 10:45 — and there is no way to find out what any of them were. verdande logs the real cause of every 500, but on a Rune the log belongs to the container and the container is replaced on every restart. So an operator is told that something broke and given nothing to act on, which is the worst of both: alarming and useless. Every 500 now writes a row: what the handler was attempting in its own words, the error it hit, the method and path, who was asking, and the request id that ties it back to the log line for whoever still has it. The "what" is the part a status code cannot give — "list projects" and "move task" are the difference between a fault you can find and one you can only count. Written best-effort and never checked. This is the path that is already reporting a failure, and a diagnostic that can itself fail the request would turn one broken screen into two. Threading the request through `internal()` and `storeError()` touched 108 call sites across 19 files, which is the price of not having had it there from the start. It is mechanical and the compiler checked all of it. Kept for thirty days by the nightly sweep: long enough to answer "what happened last week", short enough that a fault loop cannot fill the volume the tasks live on. Read at Indstillinger → Fejl, administrators only — it carries paths, account names and the server's own error strings. The empty state says "Ingen fejl registreret. Det er den rigtige tilstand", because a blank panel should not read as a broken one. The test drops a table and asks for the endpoint that reads it: the same code path a disk error takes, and the row that comes back has to name the operation, the account and the request. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
4be934ccc1 |
feat(pwa): the PNG icons the manifest and iOS have always wanted
The manifest pointed at icon.svg and nothing else. Chrome and Firefox install happily on that; Safari does not read the manifest's icons at all and looks for /apple-touch-icon.png by name, so an installed PWA on iOS got a screenshot of the page as its home-screen icon. This was written down as blocked: there is no SVG renderer on this machine, which is why the references were removed rather than left pointing at files that did not exist. Playwright is an SVG renderer, and it has been a dependency the whole time. scripts/generate-icons.js renders the same SVG at 192, 512 and 180. A script rather than a test, so CI never runs it and never rewrites a tracked binary — run it when the icon changes. The smoke test already fetches every icon the manifest names, and now asks for the Apple one by name too, so a reference with no file behind it fails there rather than on somebody's phone. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
7094e05ddd |
feat(sidebar): drop a task on "I dag"
"Do it today" is the most-made rescheduling there is, and the sidebar is where the pointer already is when you have picked a task up. Only that one of the two date views. "Kommende" is a range rather than a day — it starts today and runs a week — so a drop on it would have to invent a date its own label does not name. The month grid inside it takes a drop per cell, which is where a specific day is actually on offer. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
35d9e3bdac |
feat: an assignee on the row, and the activity log made visible
Release / Build and publish image (push) Failing after 10m2s
Two more things the database has been recording and the interface has
never shown.
**Who a task is waiting on, on the row.** Only when it is not you: your own
list would otherwise carry your own face on every line, which is a column
of one initial telling you nothing. The point of showing an assignee is
that it is somebody else.
That needed names, and a task carries only an `assignee_id`. `GET /people`
is the primitive: everybody you share a project with, plus yourself,
fetched once per session. Not per row, and not per project either — a list
would have to know which project each task belongs to before it could ask
for that project's members. Deliberately *not* the instance's user list,
which is `/users` and administrators only: a task list has no business
enumerating everybody with an account here.
It sits first in the meta line, because who changes what the rest of the
line means — a date on somebody else's task is their deadline, not yours.
**And the activity log.** Nineteen kinds of entry have been written since
the beginning — every project, section, member, task and comment event —
and `GET /projects/{id}/activity` has answered honestly the whole time with
nothing on the other end. There is a Historik panel on the project now,
loaded when it is opened rather than with the page, and the event keys
become Danish in exactly one place. An unknown key falls through to itself
rather than being hidden: a build that records something this table has not
learned should still show that it happened.
One test assertion had to change, and it is worth saying why. It matched
"males inden fredag" against a row whose title is "males inden" — quick add
read "fredag" as the due date — so it was really matching the title
concatenated with the metadata beside it. Putting the assignee between them
broke it. The assertion now names the task's own text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Kristian WindandClaude Opus 5
|
b6ea87ac19 |
feat(projects): change a member's role from the member list
An invite sent with the wrong role could not be corrected. The only way back was to remove the person and invite them again — and removing a member unassigns every task they were responsible for, so fixing a dropdown cost somebody their work. This is the other side of "an external user cannot create tasks": the rule was right, the role was wrong, and there was no way to say so. PATCH against a membership that already exists, not the upsert AddMember does. Somebody who is not a member is not silently made one: that is an invite, it belongs to the invite flow, and doing it here would let a typo in a user id add a stranger to a project without anybody being asked. The owner is refused, with the real reason rather than the true but useless one. Ownership lives on the project rather than in project_members, so the plain answer would have been "not a member" — which is correct and tells nobody anything. Ownership is transferred, not granted, and two owners is a state with no way to settle a disagreement about who may remove whom. In the list, the owner's standing is text and everybody else's is a dropdown. A disabled control would be a thing that exists to say no. And the roles are finally in Danish. The API's words are `owner`, `editor` and `viewer`, and they were being printed straight into a Danish page; the list now uses the same three phrases the invite form beside it already did. The smoke test drives both browsers, because the interesting part is that the other one's permissions really change: a viewer is told the project is read-only and has no quick-add box, the owner promotes them from the list, and after a reload the box is there and the notice is gone. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
fc32fea607 |
fix(projects): a section can be dropped into, and a failed load says so
Release / Build and publish image (push) Failing after 9m53s
Two things from the same report — an external member who could see a project but could not get work into it. **A section with no tasks could not be filled by dragging.** Only the task rows accepted a drop, so the target was always another row; a section with none had nothing to aim at, and a section you have just made is empty by definition, which is exactly when you want to put something in it. The board has taken a drop on the column since it was written. The list now does the same: the section is the target, and a drop on it puts the task at the end. Dropping on a row still means "here exactly" and stops there rather than bubbling to the section behind it. The unsectioned block at the top is a target too, which is how a task comes back *out* of a section — previously only possible if some other loose task happened to be there to aim at. **And the page said "Projektet findes ikke, eller du har ikke adgang til det" for three different things.** `project` started null with no loading state, so that sentence was what you saw before the first request returned, what you saw when it failed, and what you saw when you genuinely had no access — and the effect never asked again, so the wrong one stayed until somebody reloaded. That is very likely what was reported: the container was restarted twice while people had the app open, and a request that lands mid-restart leaves the page insisting the project does not exist. Four states now. Loading renders nothing, as the shell does. 404 keeps the old sentence, since the server deliberately answers 404 for both "no such project" and "not yours" and the interface must not guess between them. Anything else says the request failed and offers to try again. What is *not* a bug: a viewer cannot create or move tasks. Checked at the API — an editor invited by link gets 201 on create, 201 on quick add and 200 on a move into a section; a viewer gets 404 on all of them, which is the rule working. If the person reporting this cannot add tasks, their membership is viewer rather than editor. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
8b1f374855 |
test(e2e): drive a member opening a project, not just seeing it in the sidebar
The invite test proved the shared project reached the invitee's sidebar and stopped there. A member's project page is a different path from an owner's — different role, different guards — and it was never opened by anything. It also matters that the page shows "Projektet findes ikke, eller du har ikke adgang til det" while it is still loading, because `project` starts null and there is no loading state. A failed load and a slow one look identical, which makes this exactly the kind of thing a person reports and a test suite cannot see. Signs in as the invited account in its own context and clicks through to the project, asserting the heading renders and that message is absent. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
550f420c59 |
feat(sidebar): colours you can choose, and projects indented under their group
`projects.color` has been in the schema since the first migration, has defaulted to 'graphite' on every row ever written, and nothing has ever read it. There was no palette, no name-to-colour mapping, and the dot in the sidebar was hardcoded to a border grey. So this is not "add a picker"; it is implementing colour for the first time. Names, not hex values. A hex in ten thousand rows is a decision nobody can revisit; a name is resolved when the interface paints and can be retuned for a new theme or a new display. It is also the difference between a database that stores a fact and one that stores a rendering. The set is closed and refused at the edge — an unknown name would be stored happily and painted as the default, which looks like a colour that did not save. One palette across all five themes, and this is the one place in app.css that is not redefined per theme. Everything else there is text, a ground or a border and has to be measured against what sits behind it. These are small solid marks beside a label that already carries the meaning: what they owe is to be told apart, and to be visible on both a near-black and a white ground, which is why all ten sit in the mid-tone band. It also keeps them out of the trap the themes are in — a colour added to four blocks and forgotten in the fifth looks finished and falls back silently. There is no fifth block to forget. The list is written down three times: Go for validation, colors.js for the picker, app.css for the tokens that paint. So a test reads the other two — the same small-scanner approach openapi_test.go takes to the spec — and fails if the server accepts a colour nothing can draw, or the picker offers one the server refuses. Groups get a colour of their own (migration 0006) and projects inside a group are indented. The indent is to the group's *name*, not to its dot: the eye follows the text, and lining the projects up under the dot leaves them looking a step short of where the heading starts. The drop line is indented with them, so a drop inside a group reads as landing in the group. The group's dot is the control as well as the preview — you press the thing you are about to change, as on the project page. That was not the first design: a third text action, "Farve", sat beside Omdøb and Slet, and those carry `opacity: 0` rather than `display: none`, so they take their width whether or not you can see them. A group called "Arbejde" rendered as "ARBEJD". Moving the control onto the dot gave the name its room back. The smoke test measures the indent at the content edge rather than the element's, because the indent is padding and the box does not move — which is how the first version of that assertion passed 12 against 12. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
e8ebd0fa78 |
feat(admin): a page for who is on the instance, and how somebody else gets on it
Release / Build and publish image (push) Failing after 10m0s
The README has promised "internal users are created by an admin" since the beginning and there was no such thing. There are exactly two ways an account has ever come into existence: the first admin at setup, and somebody accepting an invite to a project. So the only way to add a person was to share a project with them first. The store has been ready the whole time. CreateInvite already documents that "projectID may be empty, which invites somebody to the instance rather than to a particular project", and AcceptInvite already has the branch that grants no membership when there is none. requireAdmin has existed in the middleware and was used nowhere. This wires those three together and puts a page on them. An invite rather than an account with a password the administrator picks. A password typed here would be known to two people before it was ever used, and would then have to travel to the second one by some channel nobody has thought about. No name is asked for either — the signup form asks the person, and a name an administrator guesses is a name somebody has to correct. Two refusals keep the instance administrable: the last administrator cannot be demoted or deleted, and nobody can delete the account they are signed in as. Both are enforced on the server; the interface simply does not draw the buttons on your own row, because a button whose only purpose is to be refused wastes a click to teach a rule. The last-admin refusal gets its own error code, because "that already exists" is not what happened and this is the one refusal a person needs explained. Deleting an account is the only hard delete in this database, and building the confirmation is what turned up how wide it goes. `projects.owner_id` cascades, which is expected. But `tasks.created_by` cascades too — so removing a colleague deletes every task they ever wrote, including in projects somebody else owns. The count in the list says so, and the confirmation says it in words. Changing that to ON DELETE SET NULL, so the work stays and loses its author, means rebuilding the tasks table and its FTS triggers: worth doing, not worth doing quietly while adding a screen. It is written down in the store instead. Pending invites are listed and can be withdrawn. Only the token's hash is stored, so a link sent to the wrong address cannot be looked up and resent — withdrawing it is the only way to stop it before it expires. Six API tests for the guards and the counts, and two smoke tests: the whole loop from invite to a second browser creating the account and appearing in the list as somebody who is not an administrator, and the absence of buttons on your own row. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
a8b453843d |
fix(sidebar): Omdøb og Slet lå oven i hinanden i et gruppehoved
Release / Build and publish image (push) Failing after 9m53s
The "+" beside "Projekter" is a 20px square icon button, and the rule that makes it one was written as `.group-head > button`. A group's heading is also a `.group-head`, and it has two buttons in it that are words rather than icons — so Omdøb and Slet were each squeezed into a 20px box, where they overflowed and were drawn on top of each other. They still worked. Every assertion in the smoke test clicks by accessible name, which is unaffected by a button being the wrong size, so the whole suite passed on a heading that read "0 Om…Slet". It took a screenshot from somebody actually using it. The selector now asks for the class instead of for "a button in a heading", so the next text button added there is safe by default rather than by remembering. And the smoke test measures the row: each button must start at or after the previous one's right edge. A layout assertion is unusual here on purpose — the rest of the file deliberately tests behaviour — but this is a failure mode behaviour cannot see. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
4276892590 |
feat(auth): see where you are signed in, and end one of them
`last_seen_at` has been written on every request since sessions existed —
throttled to once a minute, deliberately, so a list could one day say
"denne enhed, lige nu" — and nothing has ever read it. The store even had
ListSessions. What was missing was two routes and a panel.
GET /auth/sessions lists them, most recently used first, with the current
one marked so nobody has to work out which row is the browser they are
reading it in. DELETE /auth/sessions/{id} ends one. Ending the current
session is allowed and is simply logging out: refusing it would be a rule
with no reason behind it, and somebody clearing every device wants this
one gone too.
Both are behind requireSession rather than the ambient auth, the same as
the API tokens. A leaked token that could list its owner's devices and end
their sessions turns a theft into a lockout.
The delete is scoped in the statement rather than checked and then run.
An id read in one step and deleted in the next is a window, and the whole
reason somebody is on this screen is that they think another person is in
their account.
The device names are a handful of substring tests, not a parsing library.
The question this answers is "is one of these me?", and for that a wrong
guess between two Chromium forks costs nothing while a dependency that has
to be kept current costs something every year. Order is the whole
correctness of it: an iPhone's user agent says Mac OS X, Edge says Chrome,
and Chrome says Safari. The raw string is sent alongside and sits in the
row's title, so anything the summary gets wrong is still visible — and
something that is not a browser at all shows its own name rather than
"Ukendt", because a CalDAV client is a real session.
Times are relative. The question is "was that me, just now?", and an
absolute timestamp makes the reader do the subtraction; past a week it
switches to a date, because "for 23 dage siden" is a number nobody can
place.
The smoke test signs in a second time in a second browser context, ends
that session from the first, and checks the other browser is really signed
out — and that this one is not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
Kristian WindandClaude Opus 5
|
6b6b838167 |
feat(views): "Venter på andre", and a project you share stays yours
`assignee_id` has been on tasks since sharing was built and delegating has been possible from the drawer since yesterday. What was missing was anywhere to see it: work handed to somebody else left your lists and appeared in nothing. GET /delegated returns everything assigned to somebody who is not you, in the projects you can see, grouped by the person. Grouped on the server rather than flat, because the question is about people — "what is Anders sitting on" — and a client cannot group it itself: it would need the name behind an assignee id from a project it does not happen to have open, and there is no way to ask for that. The names come back with the tasks, so one request is one screen. The filter is a field of its own rather than a sentinel in AssigneeID. "What is on my plate" and "what have I handed over" are different questions, and one string that means an id most of the time and a magic word the rest is a field somebody eventually passes a real id to. An assignee whose account is gone is named "Ukendt" rather than dropped. Losing the row would make work disappear from the one view that exists to stop work disappearing. The sidebar entry only appears where delegating is possible at all. On an instance with one person it could never have anything in it, and a permanent empty entry is a question the sidebar keeps asking and answering "no". Building it turned up a bug in the split above it. "Projekter" and "Delt med mig" were divided on `shared`, which only means the project has more than one member — so inviting somebody to a project of your own moved it under "Delt med mig", where it lost its place in the order, stopped being draggable, and could not be filed under a group. It is divided on ownership now, which is what the two headings have always said. Sharing your own project is not the same event as somebody sharing theirs with you. The smoke test now follows the whole loop in one go: invite, accept in a second browser, assign a task to the person who just joined, and find it under their name — with the shared project still under "Projekter" on the way past. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
34b718529c |
fix(auth): the two links sent by email now go somewhere
An invite has always emailed `/invite?token=…` and "Glemt adgangskode?" has always emailed `/reset?token=…`. Neither address existed. The Go binary serves the app shell for anything it does not recognise, the shell found no session, and both links opened the plain sign-in form — asking an invited person to log into an account that did not exist yet, and asking somebody who had forgotten their password for their password. Both APIs were finished. `POST /auth/signup` takes the invite token, reads the email address off the invite rather than the form — so a link cannot be redirected to somebody else — creates the account, accepts the invite and starts the session, all in one transaction. `POST /auth/password/reset` takes the reset token and ends every session the account had. Nothing was missing but two pages. They are branches of SignIn rather than screens of their own, which is what that component already says it is for: one decision tree, so a person is never redirected mid-authentication. The routes exist because a link has to be an address, and each renders the same component; it reads the token out of the URL itself. The reset does not sign you in afterwards. The whole point of ending every session is that somebody may have been in the account, and quietly opening a new one here would undo the half of that which matters. Two states that are easy to leave out, and both are reachable in one click from an old email: a link with no token says so instead of showing a form that cannot succeed, and a link opened while already signed in as somebody else offers to log out rather than creating a second account for a person who is right there in the first one. The smoke test walks the whole invite: share a project, read the link out of the panel that shows it when there is no mail server, open it in a second browser context, create the account, and find the shared project in the sidebar. A second context and not a second page — inheriting the session would test the one case that never happens, which is what it did on the first run. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
c14559ed0c |
feat: project groups, a month on Kommende, and dragging things where they go
The three the handoff named as next. They are one commit because they are one mechanism: all three end in something being dragged, and a drop target cannot tell what is coming without the module they now share. Groups are foldable headings over the projects in the sidebar. A table rather than a `group_name` column on the project, because a group has to be renamable in one write, has to survive being emptied, and has to remember whether it is folded — none of which a string repeated on every project row can do. Folded state lives on the row, not in localStorage. The sidebar's *width* is a property of the screen you are sitting at, which is why that one is per browser; a folded group is a statement about the group — "this is the part of my work I am not in right now" — and it is true on the laptop and on the desktop. There is nobody else's answer to disagree with either: a group belongs to exactly one person. A shared project cannot be filed. `group_id` is a column on the project row, so a member grouping somebody else's project would move it in the owner's sidebar too — the same reason `sort_order` is owner-scoped. The listing reports the column only to the owner, so a viewer is never told where somebody else keeps it. Deleting a group takes the heading and leaves the projects, and the sidebar decides where a project renders by whether its group still exists rather than by the id alone. A group deleted in another tab arrives as one event and not one per project, so for a moment the projects still name a heading that is no longer drawn — filing by the raw id would drop them out of the sidebar entirely. Kommende gains the month grid the project pages already had, behind a Liste/Kalender toggle. The two views ask for different things — seven days from today against six whole weeks around an arbitrary month — so each loads its own, and the grid reports which dates it is showing rather than having the page guess. Which view is remembered in localStorage: a month of seven columns needs room, and the answer on a phone is not the answer on a wide monitor. And a task can now be dropped on a project in the sidebar, on a day in Kommende, or on a cell in any month grid. Onto a project it is a *move*, not a field: `sort_order` belongs to the project, so it has to find a place among that project's tasks and leave its old section behind. Each drag now carries its own MIME type. `getData` is deliberately unreadable while a drag is in the air — the browser hands the payload over on drop and not before, so a page cannot read what is being dragged across it — and `dataTransfer.types` is all a target has to decide with. Deciding is the point: calling preventDefault on a drag you cannot accept is what turns "no" into a silent, wrong drop. The sidebar takes a project and a task on the same row and has to tell them apart. Two things fell out of building it. The month grid has always had one cell narrower than the other six: `.today` styled the "I dag" button in the header, and the day cell for today wears the same class, so `margin-left: auto` was shrinking a grid item to its content. It is scoped to the header now. And a project page listed whatever was in the store rather than what belonged to that project, which did not matter until a task could leave a project while you were looking at it. Covered by eight new API tests and two new smoke tests, and the smoke tests drive the drags for real — the type check they exercise exists only while a drag is in flight, so nothing else can reach it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
7ab68b0b58 |
fix(projects): keep the heading, and make the sidebar test mean what it says
Renaming replaced the project page's h1 with an input, so a page an owner opened had no heading at all. The sidebar smoke test caught it on CI — and it was right to: every other view here has a heading, and it is what a screen reader announces on arrival. The heading stays and becomes a field when clicked. Same rename, one more click, and the page keeps its outline. The more interesting half is why that passed locally. The test clicked a link and immediately asserted a heading was visible — and `toBeVisible` was being satisfied by the heading of the page it had just left, before the SPA swapped it out. On this laptop the old h1 lingered long enough to answer; on a slower runner it did not. So the test did not check that the new page rendered, it checked that some page had at some point. waitForURL closes that. Verified by putting the broken heading back with the strengthened test in place: it now fails locally with the same message CI gave. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
8a6e1bc39e |
feat(projects): rename, delete, and a trash you can actually reach
A project could be created and shared and never renamed or deleted. Both have worked through the API since the beginning; there was simply nothing to click. The heading is now the field — a heading that happens to be editable rather than a form that looks like one — and saves on blur, with Escape putting the old name back. Owner only, and the Inbox keeps its plain heading because it cannot be either renamed away or deleted. Deleting needed more than a button. It is soft, with thirty days to change your mind, and restoring has been possible the whole time — from an id, which is exactly what you no longer have once the project has gone from the screen. A recovery window nobody can reach is not one. So GET /trash/projects lists what you have deleted, with how many tasks went with it and how long is left, and Settings → Data has the button. Owned, not shared: a member of a project somebody else deleted has no business bringing it back, and there is a test that says so. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
e63d852847 |
feat(mcp): let the connector address carry its own key
verdande could not be added to Claude at all. The documented setup — POST /api/v1/mcp with an Authorization header — cannot be configured from Claude's custom-connector dialog, which asks for a name, a URL and OAuth client credentials and has no field for a bearer token. The instructions described something the interface does not offer. Worse, the obvious guess failed silently in the most misleading way available: /mcp was not a route, so the SPA fallback answered 200 with a page of HTML. The connector reported a successful connection and then failed to parse the response, which reads as a broken client rather than a missing endpoint. So /mcp exists now and takes its credential in the query string, exactly as the calendar feed does and for the same reason: a client that cannot be told to send a header means the address is the credential. The request logger records paths without their query strings, so the key does not reach the log. It is deliberately outside /api/v1 and accepts the key and nothing else. Reading a session cookie here would make it a state-changing POST outside the CSRF check — a cross-site request that acts as whoever is signed in — and there is a test that fails if that ever becomes true. The API path is unchanged for anything that can send a header. The tokens page now shows the connector address next to the token it belongs to, since that is the one moment the token exists. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
25f1e2ff82 |
fix(e2e): wait for the sidebar before counting its links
Release / Build and publish image (push) Failing after 9m55s
The suite passed on a laptop and failed on the runner with zero links found. locator.all() is a snapshot and does not auto-wait: calling it straight after goto() measures how fast the machine is, not what the page contains. An assertion on the first link waits for hydration, and the hrefs are collected once and re-resolved on each pass rather than held as element handles — navigating re-renders the sidebar, so a handle from before the click points at an element that no longer exists. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
Kristian WindandClaude Opus 5
|
1424f43a40 |
test(e2e): smoke tests that drive the real binary
The brief asked for these under Definition of done and they were never written. 610 Go tests, none of which opens a browser. Six flows: create the first account and sign in, quick add and tick a task off, click every link in the sidebar, open a task and edit it, walk every settings tab, and check that the manifest's icons and the service worker can actually be fetched. Every assertion is on rendered content rather than on a URL — the binary serves the SPA shell for anything it does not recognise, so toHaveURL passes on precisely the bug this exists to catch. The suite builds the frontend, copies it into cmd/verdande/webbuild and starts the real binary, every run. Merely starting the server would test whatever frontend was copied there last, which during development is nearly always the wrong one, and a green report on code that is not running is worse than no report. Chromium only. A smoke test catches a build that does not work at all; running it in three engines finds the same breakage three times. They found four bugs the first time they ran, fixed in the commits before this one: concurrent writes returning SQLITE_BUSY, a completed task keeping its row, the same task landing in the list twice, and a database failure presenting as everybody being logged out. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |